Boya announced their latest, and most versatile microphone system, Boyamic.
The comprehensive system includes two transmitters, a receiver, a Lightning, and USB-C adapter, plus a pair of lavalier microphones.
If that isn’t enough, it also boasts on-device recording, with a respectable 8GB of storage. Boya claims this is enough to capture up to 15 hours of audio. Boyamic has an expected battery life of 10 hours, or 6 when onboard recording is enabled, perfect for a convention, or other event. This amount can increase to 50 hours with the capsule is included.
Depending on your needs, the receiver also works with dual capture. This enables content creators to make captures for different situations at the same time.
The full feature list, and technical specs for Boyamic can be found below. However, if you prefer hands on information, make sure to check back later today for our full review.
Boya Boyamic Overview
Up to 300 meters of wireless transmission
Separate noise cancellation control – 48kHz/ 24bit HD audio format retained
Wide-range 20-20,000Hz frequency response – deliver exceptional high-quality sound
8GB memory – store up to 15 hours of recording
Transmitter’ USB-C port – connect to a laptop or smartphone to read recording files
Up to 10 hours of operating time (about 6 hours when the onboard recording is enabled)
Comes with a windproof capsule – minimize unwanted wind noise
Attach the transmitter can be to your clothes with the included magnet
Rotating clasp-type fur windshield, not easy to fall off
Receiver’s 3.5mm headphone output – monitor your audio in real-time or playback audio
Product Parameters
Transmitter
Transmission Type – 2.4GHz digital frequency
Modulation – GFSK
Polar Pattern – Omnidirectional
Operating Range – Up to 300m (Measured in open environment without obstacles and interference.)
RF Output Power -＜10mW
Frequency Response – 20Hz-20kHz
Maximum SPL – 120dB SPL
Sampling/ Bit Rate – 48kHz / 24bit
Sensitivity – -39dB±2dB
Signal-to-Noise Ratio – >90dB
Distortion -＜0.07%
Audio Input – Built-in microphone capsule; 3.5mm TRS mic input or line input
Power Requirements – Built-in lithium-ion battery / Charging contacts / USB-C charging port (DC 5V)
